Staehle Consulting


Selected publications
 

Full list available by contacting Staehle Consulting.

  • R.M. Latanision and R.W. Staehle, “Stress Corrosion Cracking of Iron Nickel Chromium Alloys,” Fundamental Aspects of Stress Corrosion Cracking, NACE-1, Eds. R.W. Staehle, A.J. Forty and D. van Rooyen, conference held at Ohio State University, Columbus, Ohio, September 11-15, 1967, NACE, Houston, 1969, pp. 214-307.
  • R.W. Staehle, J.J. Royuela, T.L. Raredon, E. Serrate, C.R. Morin, and R.V. Farrar, “Effect of Alloy Composition on Stress Corrosion Cracking of Fe-Cr-Ni Base Alloys,” Corrosion Vol. 26, No. 11, 1970, pp. 451-486.
  • R.W. Staehle, “Stress Corrosion Cracking of Fe-Cr-Ni Alloy Systems,” Theory of Stress Corrosion Cracking, Ed. J.C. Scully, NATO Scientific Affairs Division, Brussels, 1971, pp. 222-288.
  • Staehle in his office with 6-screen computer system.R.D. McCright and R.W. Staehle, “Effect of Arsenic upon the Entry of Hydrogen into Mild Steel as Determined at Constant Electrochemical Potential,” Journal of the Electrochemical Society, Vol. 121, No. 5, 1974, pp. 609-618.
  • J.H. Payer and R.W. Staehle, “Localized Attack on Metal Surfaces,” Corrosion Fatigue: Chemistry, Mechanics, and Microstructure, NACE-2, Eds. R.W. Staehle, A.J. McEvily, and O.F. Devereau, conference held at The University of Connecticut, Storrs, Connecticut, June 14-18, 1971, NACE, Houston, 1974, pp. 211-269.
  • Kawashima, A.K. Agrawal, and R.W. Staehle, “Stress-Corrosion Cracking of Admiralty Brass in Nonammoniacal Sulfate Solutions,” Journal of the Electrochemical Society, Vol. 124, 1977, pp. 1822-1823.
  • G.E. Kerns, M. Wang, and R.W. Staehle, “Stress Corrosion Cracking and Hydrogen Embrittlement in High Strength Steels,” Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, NACE-5, Eds. J. Hochmann, J. Slater, R.D. McCright, and R.W. Staehle, conference held at Unieux-Firminy, France, June 12-16, 1973, NACE, Houston, 1977, pp. 700-735.
  • G. Theus and R.W. Staehle, “Review of Stress Corrosion Cracking and Hydrogen Embrittlement in the Austenitic Fe-Cr-Ni Alloys,” Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, NACE-5, Eds. J. Hochmann, J. Slater, R.D. McCright and R.W. Staehle, conference held at Unieux-Firminy, France, June 12-16, 1973, NACE, Houston, 1977, pp. 845-892.
  • H. Chaung, J.B. Lumsden, and R.W. Staehle,  “Effect of Segregated Sulfur on the Stress Corrosion Susceptibility of Nickel,” Met. Trans. A, Vol. 10A, December, 1979, pp. 1853-1857.
  • R.W. Staehle, “Understanding 'Situation-Dependent Strength':  A Fundamental Objective in Assessing the History of Stress Corrosion Cracking,” ASM and TMS, Kohler, WI, October 2-7, 1988, Environment-Induced Cracking of Metals, NACE-10, Eds. R.P. Gangloff and M.B. Ives, NACE, Houston, 1990, pp. 561-612.
  • K.D. Stavropoulos, J.A. Gorman, R.W. Staehle, and C.S. Welty, Jr., “Selection of Statistical Distributions for Prediction of Steam Generator Tube Degradation,” 5th International Symposium on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, Eds. E. Simonen and D. Cubicciotti, conference held August 25-29, 1991, Monterey, California, American Nuclear Society, La Grange Park, Illinois, 1991, pp. 731-738.
  • R.W. Staehle, “Development and Application of Corrosion Mode Diagrams,” Parkins Symposium on Stress Corrosion Cracking, Eds. S.M. Bruemmer, E.I. Meletis, R.H. Jones, W.W. Gerberich, and F.P. Ford, TMS, Warrendale, PA, 1992, p.191.
  • R.W. Staehle, “Lifetime Prediction of Materials in Environments,” Uhlig’s Corrosion Handbook, 2nd edition, Ed. R.W. Revie, John Wiley and Sons, New York, 2000, pp. 27-84.
  • Little, R.W. Staehle, and R. Davis, “Fungal Influenced Corrosion of Post-Tensioned Cables,” International Biodeterioration and Biodegradation, Vol. 47, 2001, pp. 71-77.
  • R.W. Staehle, “Bases for Predicting the Earliest Failures Due to Stress Corrosion Cracking,”  Chemistry and Electrochemistry of Corrosion and Stress Corrosion Cracking: A Symposium Honoring the Contributions of R.W. Staehle, Ed. R. Jones, The Minerals, Metals and Materials Society (TMS), Warrendale, Pennsylvania, 2001, pp. K1-K92.
  • Staehle presenting at a seminar on material problems in light water nuclear power plants, China, 2007R.W. Staehle, “Assessment of and Proposal for a Mechanistic Interpretation of the SCC of High Nickel Alloys in Lead-Containing Environments,” presented at the 11th International Conference on Environmental Degradation of Materials in of Nuclear Power Systems – Water Reactors, Chair L. Nelson, Stevenson, Washington, ANS, La Grange Park, Illinois, August 10-14, 2003.
  • R.W. Staehle, “Predicting Failures in Light Water Nuclear Reactors Which Have Not Yet Been Observed – Microprocess Sequence Approach (MPSA),” presented at the 2nd International Conference on Environment-Induced Cracking of Metals, EICM-2, The Banff Center, Calgary, Alberta, Canada, September 19-23, 2004.
  • R.W. Staehle, “Clues and Issues in the SCC of High Nickel Alloys Associated with Dissolved Lead,” Proceedings of the 12th International Conference on Environmental Degradation of Materials in Nuclear Systems – Water Reactors, Snowbird Resort, Salt Lake City, UT, August 14-18, 2005, TMS, Warrendale, PA, 2005.
  • R.W. Staehle, “Serious Concerns and Actions for Mitigating Future Degradation in Modern Steam Generators,” Proceedings of the 5th CNS International Steam Generator Conference, Canadian Nuclear Society, Toronto, Ontario, Canada, November 26-29, 2006.
  • P.L. Andresen, F.P. Ford, K. Gott, R.L. Jones, P.M. Scott, T. Shoji, R.W. Staehle, and R.L. Tapping, Expert Panel Report on Proactive Materials Degradation Assessment, Brookhaven National Laboratory and U.S. Nuclear Regulatory Commission, NUREG/CR-6923, 2007.
  • R.W. Staehle, “Critical Analysis of Tight Cracks,” presented at the 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, Whistler, BC, 2007.
  • R.W. Staehle, “Anatomy of Proactivity,” presented at the Proceedings of the International Symposium on Research for Aging Management of Light Water Reactors and Its Future Trend (The 15th Anniversary of INSS), October 22-23, 2007, Fukui, Japan, Eds. B.L. Eyre and I. Kimura, 2008, pp. 29-115.
  • R.W. Staehle, “The ‘Rickover Paradigm’ for Safety and Reliability of Nuclear Power,” Presented at the 6th CNS International Steam Generator Conference, Toronto, Ontario, November 8-11, 2009.
  • R.W. Staehle, “Historical Review on Stress Corrosion Cracking of Ni-based Alloys – The Coriou Effect,” Presented at CEA, January 26, 2010.  To be published.
  • R.W. Staehle, “A Statistically Based Model for the Initiation of SCC of Alloy 600MA – The ‘Stat-Phys’ Model of SCC,” NRC/ANL Contract No. 2F-01942, April 30, 2010.
  • R.W. Staehle, “Quantitative Micro-Nano (QMN-1) Approach to Predicting SCC of Fe-Cr-Ni Alloys,” Proceedings of Workshop Held at Sun Valley Resort, Idaho, June 13-18, 2010.
  • R.W. Staehle, “Quantitative Micro-Nano (QMN-2) Approach to Predicting SCC of Fe-Cr-Ni Alloys – Initiation of SCC,” Proceedings of Workshop Held at Sun Valley Resort, Idaho, June 12-17, 2011.
  • R.W. Staehle and R. Xiong, “Predicting Corrosion and Stress Corrosion Cracking of Fe-Cr-Ni Alloys in Supercritical Water Based on Historical Experience,” presented at the Technical Meeting on Materials and Chemistry for Supercritical Water Cooled Reactors, IE-JRC-EC Petten, the Netherlands, July 18-22, 2011.
  • R.W. Staehle, “Quantitative Micro-Nano (QMN) Approach to SCC Mechanism and Prediction – Starting a Third Meeting,” Presented at the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, Colorado Springs, Colorado, August 7-11, 2011.

Mary Ilg - Office Manager
 | Email: mary.rwstaehle@gmail.com